A-A-55192A
5.2.2 Dimensional Examination. The finished case shall conform to the dimensions specified. Any
dimension that is not within the established tolerance (+1 inch, -0 inch) shall be classified as a defect.
5.3 End Item Performance Testing. The end items shall be tested for odor, label adhesion, seam
strength, crease strength and leakage.
5.3.1
Requirement for Odor . Determination of odor shall be made on samples freely exposed to
circulating air at 75 degrees F +/- 5 degrees F (24 degrees C +/- 3 degrees C) for not less
than 24 hours.
5.3.2
Requirement for label adhesion. Each case shall have a label that is directly printed, stamped or
stenciled on the case. The contents, size and characters of the inscription, and the format shall
be as follows;
ITEM DESCRIPTION
- minimum of 18 points (approximately ¼ inch)
CONTRACT NUMBER
- minimum of 18 points (approximately ¼ inch)
STOCK NUMBER
- minimum of 18 points (approximately ¼ inch)
SIZE
- minimum of 18 points (approximately ¼ inch)
CONTRACTOR'S NAME (bottom of label)
- maximum of 18 points (approximately ¼ inch
5.3.3. Seam Strength Requirement. Each specimen shall be cut 1 inch by 6 inches with the seam
approximately in the middle and parallel to the short sides of the specimen. If the average breaking
strength for any sample unit falls to meet the requirements specified, the lot shall be rejected.
5.3.4. Requirement for Leakage. The case shall not leak or separate at the seam when tested as
specified.
5.3.5 Odor test. Determination of odor shall be made on samples freely exposed to circulating air at 75
degrees F +/- 5 degrees F (24 degrees C +/- 3 degrees C) for not less than 24 hours.
5.3.6 Ink adhesion label test. The ink adhesion shall be determined in accordance with
ASTM F 1842 except that the test shall be performed on the label of a finished case. The test area of
the label shall be visually examined for legibility.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business