A-A-2523B
4. QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. Unless otherwise specified in the contract
or purchase order, the contractor is responsible for the performance of all
inspection requirements as specified in this
CID. Except as otherwise specified, the contractor may
utilize his own facilities or any commercial laboratory acceptable to the
Government. The Government reserves the right to perform any of the inspections
or tests set forth in the specifications where such action is deemed necessary
to assure that supplies and services conform to prescribed requirements. The
contractor is responsible for insuring that components and materials used were
manufactured, examined, and tested in accordance with referenced specifications
and standards.
4.2 Classification of inspections. The inspection requirements specified
herein are classified as follows:
a. First article inspection (see 4.3)
b. Quality conformance inspection (see 4.4)
4.3 First article inspection. When a first article is
required (see 3.1 and 6.2), it shall be examined for the defects specified in 4.4.3
and tested for the characteristics specified in 4.6.
4.4 Quality conformance inspection.
4.4.1 Sampling. The levels of inspection and acceptable quality levels
(AQL’s) shall be in accordance with MIL-STD-105.
4.4.2 Lot formation. All cases from the same manufacturer of the same
size offered for delivery at one time shall be considered a lot for purposes of
inspection and testing.
4.4.3 Sampling for visual and dimensional examination. A random sample
of cases shall be selected from each lot in accordance with inspection level I,
AQL 4.0 expressed in terms of defects per hundred units. The sample unit shall
be one case. The sample cases shall be visually and dimensionally examined to
verify compliance with table I and this commercial item description. All
dimensions are absolute as defined in ASTM E 29.
4.5 Sampling for tests. A random sample of dispatch cases shall be
selected from each lot in accordance with inspection level S-2, AQL 6.5
expressed in percent defective.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business