A-A-2523B
The drum shall be equipped with the conical projection hazard positioned in face No. 4 in accordance with ASTM D 782. The case shall be placed in the drum and tumbled for 120 falls (the counter for the drum shall be set to record six falls per revolution). The case shall remain closed during the test. After testing, the case shall be examined for cracking or fracturing of the frame. Deformation, abrasion or gouging of the frame is permitted only to the extent that it does not, at the same time, deform the shell and/or result in more than .alight binding of the mating frame sections. The shell shall be examined for cracking, fracturing, punctures or separation from the frame. The feet or bumpers shall not become detached, cracked or deformed upon completion of the test, slight loosening of the feet is permitted if their function is not impaired.
4.6.6 Lock, latch and hinge test. The lock, latch, and hinge test shall be performed on first article inspections only. An assembled case shall be unlatched, opened to completely engage the stay, closed, and latched for 10,000 cycles. The above procedure shall be considered one cycle when tested in the sequence cited. Upon completion of the test, the case shall be examined to insure that none of the components are cracked, fractured, loosened or deformed to the extent that the case is inoperable. Deformation, abrasion, or gouging of the frame is permitted only to the extent that it does not, at the same time, deform the shell and/or result in binding of the mating frame sections.
4.7 Examination for preparation for delivery. A random sample of shipping containers shall be selected from each lot for examination of the unit, intermediate and shipping containers (as applicable) for conformance with the packaging, packing, and marking required in the contract or order. Samples shall be selected in accordance with inspection level S-2, AQL 6.5, expressed in terms of defects per hundred units. The sample unit shall be one shipping container.
5. PREPARATION FOR DELIVERY
5.1 Packaging, packing, and marking. The packaging, packing, and marking shall be as specified in the contract or order.
6. NOTES
6.1 Ordering data. The purchasers should select the preferred options permitted herein and include the following in Procurement documents.
(a) Title, number, and date of this commercial item description.
(b) Size required.
(c) When a first article is required (see 3.1, 4.3, and 6.2).
(d) The packaging, packing, and marking required.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business