A-A-1519A
The interior of the lid shall have a file pocket with a minimum of two tiered full-size compartments, one exterior compartment and two adjustable retaining straps. Each full-size compartment shall open to a minimum of 14-1/2 inches by 9 inches with the retaining straps attached. The front of the file pocket shall have a minimum of one exterior pocket for small accessories, a business card pocket and two pen loops. The file pocket shall be covered with the same material as the interior of the case or material of greater weight matching the interior.
3.3 Hardware. The case shall have a steel reinforced handle covered with the same vinyl used for the exterior of the case. The handle shall be comfortable in use and shall not expose the user to any sharp edges or points that may cause discomfort.
Hardware shall consist of the following as a minimum:
2 Exterior hinges
2 Interior hinges or stays (ball or positive stop-type to hold the lid in the open position).
4 Feet or bumpers, metal (may be integral part of hinge)
2 Latches/hasps with a combination lock on each latch
The finish on the hardware shall be brass plating. The hinges and latches/hasps shall be securely fastened to the case through the frame. The combination locks shall be capable of being reset to different combinations.
3.4 Test requirements. The case shall be capable of passing the drop test and remain fully functional. The case shall be capable of passing the handle test without loosening or deformation of the handle and supporting hardware (see 4.6 and 4.7).
3.5 Commercial item. The use of the term “commercial item description” in this document does not imply that any item or items offered are not required to conform with all requirements specified herein.
Additional or better features, which are not specifically prohibited by this purchase description but are part of the manufacturer’s standard commercial product, shall be included in the case being furnished.
3.6 Workmanship. The completed case shall present a neat, finished appearance both inside and outside, and shall exhibit no evidence of sharp, jagged or rough frame crimping or other unfinished components. The case shall be free from defects which may affect durability, serviceability, or appearance.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business